Wine Rack Lattice

wine rack lattice 1

Wine Rack Lattice

If your household includes the use of wine, display it proudly with a small wine rack you make yourself using lattice. Lattice is often used as a rack system for wine bottles; with its 3-inch-wide, diamond-shaped openings, all you need to do is trim and fit. The bottles slip into the lattice openings with support at both ends. It’s convenient, attractive and practical. If you wish to hide the wine rack, simply build the lattice structure inside a cabinet in a way that allows you to open and close the cabinet door as you wish.
wine rack lattice 1

Wine Rack Lattice

Cut four pieces of 3/4-by-2-by-24-inch pine to the width of the lattice panels, using a miter saw. Stand two of the pine pieces on edge, parallel to each other. Place one of the lattice panels on top, flush at the top and bottom of the pine pieces. Use a staple gun and 1 1/4-inch staples to fasten the lattice panel to the pine at the top and bottom. Shoot through the cut-off ends of the individual pieces of lattice. Do both panels the same way.
wine rack lattice 2

Wine Rack Lattice

3Cut four pieces of 3/4-by-2-by-24-inch pine to the width of the lattice panels, using a miter saw. Stand two of the pine pieces on edge, parallel to each other. Place one of the lattice panels on top, flush at the top and bottom of the pine pieces. Use a staple gun and 1 1/4-inch staples to fasten the lattice panel to the pine at the top and bottom. Shoot through the cut-off ends of the individual pieces of lattice. Do both panels the same way.
wine rack lattice 3

Wine Rack Lattice

Carved Table Legs Castlewood offers a full line of carved table legs that are unique to the industry. The legs are built to the industry standard 35.25″ height. Wine Rack Lattices Wine Rack Lattice’s provide an attractive place to store and display bottles. They are offered in a variety of North American hardwoods and available for immediate shipment. Knobs and Pulls Castlewood and AMS are proud to announce the introduction of Castlewood knobs and pulls. These products are available now and come in a variety of North American hardwoods. Special Offers Deep discounts are avaible on a wide variety of in-stock first quality hand and machine carved decorative wood components, embellsihments, and accessories. Castlewood Blog Visit the new Castlewood blog to get current product updates, special offers, and stay up to date with everything Castlewood has going on.
wine rack lattice 4

Wine Rack Lattice

Cut the measurements out, using a jig saw, to produce a lattice panel to match the width and height of the inside of the cabinet. Use the panel as a template to trace another panel on the remaining piece of lattice. Cut it out to produce two identical lattice panels.
wine rack lattice 5

Wine Rack Lattice

2Cut the measurements out, using a jig saw, to produce a lattice panel to match the width and height of the inside of the cabinet. Use the panel as a template to trace another panel on the remaining piece of lattice. Cut it out to produce two identical lattice panels.
wine rack lattice 6

Wine Rack Lattice

Tips Smaller cabinets do not typically have shelves, but if yours does, cut the shelf out with a jigsaw or tap it out with a hammer. Depending on the depth of the cabinet, move the lattice panels forward or back to best utilize the cabinet and bottles.

Leave a Reply